2 radial cd 262 qm series 12 000 - 14 000h at 105c longest lifetime for high voltage high ripple current down sized lighting, electronic ballast, power supplies item characteristics operating temperature range (c) -25 ~ +105 voltage range (v) 160 ~ 450 capacitance range (f) 6,8 ~ 220 capacitance tolerance (20c, 120hz) 20% leakage current (a) after 1 minute at 20c application of rated voltage, leakage current is not more than 0,04 cv + 100. c: nominal capacitance (f) v: rated voltage (v) dissipation factor (20c, 120hz) rated voltage (v) 160 200 2 0 0 00 0 tan (max) 0,15 0,20 stability at low temperature (impedance ratio at 120hz) rated voltage (v) 160 200 2 0 0 00 0 z - 25c / z +20c 3 6 useful life load life endurance test shelf life lifetime ? = 10 : 12 000h ? 12 : 14 000h >100 000h ? = 10 : 10 000h ? 12 : 12 000h ? = 10 : 8 000h ? 12 : 10 000h 1 000h leakage current not more than specifed value not more than specifed value not more than specifed value not more than specifed value capacity change within 50% of initial value within 30% of initial value within 20% of initial value within 20% of initial value dissipation factor not more than 500% of specifed value not more than 300% of specifed value not more than 200% of specifed value not more than 200% of specifed value condition: applied voltage applied current applied temperature failure rate level u r i r 105c 1% failure rate u r 1,4 x i r 60c 1% failure rate u r i r 105c guaranteed u r i r = 0 105c u r = 0 i r = 0 105c after test: u r to be applied for 30min >24h before measurement frequency 50hz 120hz 1khz 10khz 100khz coeffcient 0,30 0,50 0,80 0,90 1,00 multiplier for ripple current frequency coeffcient i a = actual ripple current at 100khz, i r = rated ripple current at 100khz, 105c multiplier of useful life as a function of ambient temperature and ripple current load lifetime diagram 40 50 60 70 80 90 100 110 cd 262 qm series t a (?c) i a CCC i r 2.5 2.0 1.5 1.0 0.5 0.0 x32 x16 x8 x4 x2 x1 lifetime multiplier cd 11g gw cd 261x qx cd 261 lk 125c cd 262 qm longest life highest currents direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
2 custom products are available on request. radial cd 262 qm series ratings for cd 262 qm series v dc (surge voltage) code rated capacitance max esr 20c, 100hz typ esr 20c, 100hz max ripple current 105c, 100khz size ? d x l (v) (f) () () (marms) (mm) 160 (200) 2c 10 23,9 8,0 250 10 x 16 22 10,9 3,6 500 10 x 20 33 7,2 2,5 500 10 x 20 47 5,1 1,7 660 12,5 x 20 68 3,5 1,2 760 12,5 x 25 3,5 1,2 760 16 x 20 100 2,4 0,80 1 120 16 x 25 2,4 0,80 1 120 18 x 20 150 1,6 0,50 1 360 16 x 31,5 1,6 0,50 1 360 18 x 25 220 1,1 0,35 1 400 16 x 31,5 1,1 0,35 1 400 18 x 25 200 (250) 2d 10 23,9 8,0 250 10 x 16 22 10,9 3,6 500 10 x 20 33 7,2 2,4 600 12,5 x 20 47 5,1 1,7 660 12,5 x 20 68 3,5 1,2 760 12,5 x 25 3,5 1,2 760 16 x 20 100 2,4 0,80 1 120 16 x 25 2,4 0,80 1 120 18 x 20 150 1,6 0,50 1 360 16 x 31,5 1,6 0,50 1 360 18 x 25 220 1,1 0,35 1 700 18 x 31,5 250 (300) 2e 10 23,9 8,0 280 10 x 20 22 10,9 3,5 600 12,5 x 20 33 7,2 2,5 600 12,5 x 20 47 5,1 1,7 720 12,5 x 25 5,1 1,7 720 16 x 20 68 3,5 1,2 920 16 x 25 3,5 1,2 920 18 x 20 100 2,4 0,80 1 200 16 x 31,5 2,4 0,80 1 200 18 x 25 150 1,6 0,50 1 500 18 x 31,5 350 (400) 2v 6,8 46,9 16,0 220 10 x 16 10 31,8 11,0 280 10 x 20 22 14,5 5,0 350 12,5 x 20 33 9,7 3,5 500 16 x 20 47 6,8 2,3 660 16 x 25 6,8 2,3 660 18 x 20 68 4,7 1,6 850 16 x 31,5 4,7 1,6 850 18 x 25 v dc (surge voltage) code rated capacitance max esr 20c, 100hz typ esr 20c, 100hz max ripple current 105c, 100khz size ? d x l (v) (f) () () (marms) (mm) 400 (450) 2g 6,8 46,8 16,0 220 10 x 16 10 31,8 11,0 280 10 x 20 22 14,5 5,0 430 12,5 x 25 14,5 5,0 430 16 x 20 33 9,7 3,5 640 16 x 25 9,7 3,5 640 18 x 20 47 6,8 2,3 840 16 x 31,5 6,8 2,3 840 18 x 25 68 4,7 1,6 1 000 18 x 31,5 450 (500) 2w 6,8 46,8 16,0 150 10 x 20 10 31,8 11,0 320 12,5 x 20 22 14,5 5,0 560 16 x 25 14,5 5,0 560 18 x 20 33 9,7 3,5 700 16 x 31,5 9,7 3,5 700 18 x 25 47 6,8 2,3 880 18 x 31,5 68 4,7 1,6 1 130 18 x 35,5 direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
8 part number system ec r 1c pt 101 m ff 2 0611 je xxxxx technology terminal type rated voltage code series code capacitance code (in f) capacitance tolerance lead form terminal/ pitch size dimension for specials only ec = electrolytic capacitor smd = v for coding please refer to the pages of ratings cd vs = bs 0,47 = r47 20% = m smd: 4x7 = 0407 radial = r cd vh = vh 1,0 = 010 10% = k taped = ff terminal = t2 5x11,5 = 0511 pc = polymer capacitor snap-in = s cd vz = vz 2,2 = 2r2 +30 / -10% = q radial: 6,3x11,5 = 0611 cd 261 = lk 100 = 101 +50 / -10% = t long lead = ll 2,0mm = 20 35x80 = 3580 cd 261x = qx 1 000 = 102 cut 5,0mm = cb 2,5mm = 25 45x100 = 45100 cd 262 = qm 10 000 = 103 cut , mm = cc 3,5mm = 35 cd 26 = bk cut 4,0mm = cd 5,0mm = 50 cd 269 = ph cut 3,5mm = ce 7,5mm = 75 cd 281 = ll cut 3,0mm = cf 10,0mm = 10 cd 28 = xy on request: alternative lead forms (axial, 90 - angle, others) 12,5mm = 12 cd 287 = gc cd 28l = ql snap-in: cd 29 = bz 4,0mm pin length = t4 2 pin = p2 cd 29 = bw 6, mm pin length = t6 3 pin = p3 cd 29 = bc soldering pin = s4 4 pin = p4 cd 296 = kc 5 pin = p5 cd 297 = bb preferred cd 299 = pg cd 29d = hr cd 29h = qh cd 29l = ql hcp = cp hpm = pm hvc = vc order code smd, radial, snap-in technical specifcation smd type dimensions ? d x l x , x , 6, x , 6, x 7,7 8 x 10, 8 x 11,8 10x10, 10x12,7 a 1,8 2,1 2,4 2,5 2,9 2,9 3,2 3,2 b 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 c 4,3 5,3 6,6 6,6 8,3 8,4 10,3 10,4 e 1,0 1,3 2,2 2,2 3,1 3,1 4,5 4,5 l 5,4 5,4 5,4 7,7 10,5 11,8 10,5 12,7 w 0,5 - 0,8 0,7 - 1,1 in mm size (dxl) w 0, a 0,2 b 0,2 p 0,1 t2 0,2 f 0,1 t1 0,1 4 x 5,4 12,0 5,0 5,0 8,0 5,8 5,5 0,4 5 x 5,4 12,0 6,0 6,0 12,0 5,8 5,5 0,4 6,3 x 5,4 16,0 7,0 7,0 12,0 5,8 7,5 0,4 6,3 x 7,7 16,0 7,0 7,0 12,0 8,4 7,5 0,4 8 x 10,5 24,0 8,7 8,7 16,0 11,0 11,5 0,5 8 x 11,8 24,0 8,7 8,7 16,0 12,3 11,5 0,5 10 x 10,5 24,0 10,7 10,7 16,0 11,0 11,5 0,5 10 x 12,7 24,0 10,7 10,7 16,0 14,0 11,5 0,5 in mm taping dimensions diameter w d 4; 5 14 1 50 1 6,3 18 1 50 1 8; 10 25 1 50 1 polymer 25 1 80 1 in mm for more details or soldering profles of radials or polymer-capacitors please contact our local sales offces. allowable range of peak temperature size t (c) t (second) t 1 (second) ? 4 ~ 6,3 250 90 40 ? 8 x 10,5 240 90 30 ? 10 x 10,5 235 60 30 soldering profle (aluminium electrolytic capacitors) direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
9 part number system l l 7 l 11 ? d 3 4 5 6,3 8 5 6,3 8 10 12,5 16 18 20 22 25 f 1 1,5 2,0 2,5 3,5 2,0 2,5 3,5 5,0 7,5 10,0 12,5 ? d 0,4 0,45 0,5 0,6 0,8 1,0 a max 1,0 2,0 in mm dimensions for loose, long-lead type, (bulk) order code: ll dimensions for ammopack taping order code: ff (fd) code case range dimensions form ammopack ? d l (max) h 0,75 ho 0,5 f 0,5 p 0,1 ff 4 ~ 6 13 18,5 - 2,5 12,7 a 8 13 18,5 - 3,5 12,7 4 ~ 8 7 17,5 16 5 12,7 b 5 ~ 6,3 13 18,5 8 22 20,0 10 22 18,5 - a 12,5 27 18,5 - 15,0 fd 12,5 27 18,5 - 25,4 c ff 16 ~ 18 27 18,5 - 7,5 30,0 in mm dimensions for loose, short cut leads, (bulk) order code: cc (cb,cd,ce,cf) straight lead bended lead code cb cc cd ce cf i 5,0 0,5 4,5 0,5 4,0 0,5 3,5 0,5 3,0 0,5 in mm preferred form a form b form c technical specifcation radial type 2.5max direct contact & support: jianghai europe gmbh +49 (0)2151-652088-0 info@jianghai-europe.com www.jianghai-europe.com v2006.2
|